The Wood Badge Woggle
The "woggle" or Turk's Head knot is the traditional neckechief slide of Wood Badge and is created by each
candidate on the first day of Wood Badge class.
|
1. Place
the braid around three fingers of the left hand, palm up (Fig. 1).
The working end of the braid known as "X" and the stationary end as
"Y". |
2. Bring
end X over the stationary end Y (Fig. 1) and around the back of the
hand (Fig. 2). |
|
|
3. Thread
end X over A and under Y thus forming B (Fig. 2-3). |
4. Turn your left hand over, palm down |
|
|
5. Loop A over B and B under A (Fig. 5). Hold in position by placing
the forefinger of the left hand between A and B. |
6. Thread
end X under B through the crisscross loop thus formed by A and B. |
|
|
7. Thread end X under B (Fig. 6) over A and under B again (Fig. 7-8). |
8. Turn the hand over, palm up (Fig. 9). Bring end X along side of and
parallel to end Y by threading the strand under A and over B (Fig.
9-10). Follow the direction of the dotted arrow. |
|
|
9. The Turk's head neckerchief slide is formed by following this strand
Y around three times; i.e., until there are three braided strands
parallel to each other all around the slide (Fig. 10, 11, 12)
|
10. The second time around is indicated in fig 11 as well as the beginning
of the third time around. Fig 12 indicates end X on the completion
of its third time around. |
|
|
11. In doing this it may be necessary to take in the slack from time to
time so there will be a sufficient amount of material to
complete the slide. |
12. It is important to adjust the slide so that it will be neat as well
as the right size. Then, too, it will be necessary to remove the slide
from the fingers when you thread end X around the for second and third
time (Fig. 11-12). |
|
The slide ends at the same point at which it was begun (Y). This completes
the woogle neckerchief slide. |
|